Parking Stops

Parking Stops protect the car from bumping into a raised pavement. The recommended anchors for this application is the AASP18-M12x300 to allow for quick and easy replacement of damaged stops and to prevent pullout in difficult conditions.

Mount Bike Racks

One of the most common applications for our asphalt anchors is for mounting bike racks to asphalt. The suggested anchor is AASP10-M10x150.

Posts and Fences

Our anchors can be used to install fences, posts, signs and bollards directly to the asphalt surface. We recommend using the AASP18-M12x300 anchor, our strongest.

Bollards

Bollards protect equipment, buildings and entryways from cars. We recommend using AASP18-M12x300 anchors to secure the bollards to asphalt.

Traffic lane delineation

These posts help define traffic lanes. For flexible posts, use our AASP-M10x150 asphalt anchors.  For stiff posts, use our AASP12-M10x300 asphalt anchors.

Roadside Signs

Our anchors are widely used to attach small signs to asphalt. Examples are parking signs, directions signs, warning signs and the like.

Solar Panels

The AASP10-M10x150 is suitable for mounting most solar panels to asphalt depending on the desired goal.

Railings

Our AASP12-M10x300 and AASP18-M12x300 have been used extensively to secure railing to asphalt that require heavy duty connections.

Runaway Airplane Arresting Fields

The AASP10-M10x150 has been used to install large arrestor fields at the end of runways. See AN34 for the full story about multi-runway installations in Midway airport in Chicago

Bus Shelters

Bus shelters can be attached to asphalt using the AASP10-M10x150 asphalt anchors. For applications where high winds are expected, use the AASP12-M10x300 or AASP18-M12x300. Click on the picture to see a short slide presentation showing step-by-step installation of a bus shelter.

Shopping-cart corrals

Our AASP12-M10x300 have been used extensively to tie down shopping cart corrals to asphalt. Corrals must be secured to asphalt against strong winds. At least one manufacturer uses our anchors to meet regulations that require withstanding 120km/h winds, as well as a national supermarket chain.

Speed Bumps

Plastic or rubber speed bumps and speed humps are used for traffic calming in private streets, parking lots and access roads. Speed humps are shallower and wider (in the direction of travel) than speed bumps.

​The AASP18-M12x300 is the recommended anchor for this application. We suggest that you apply anti-seize grease to the bolt before securing the bump. The reason is that the rubber bumps wear out over time and need to be replaced. The bolts may rust and make it impossible to remove, unless the anti-seize paste has been applied.

​For extremely tough applications, where continuous trucking traffic pounds the bumps and requires their constant replacement, contact us about our custom AASP58-M16x250 anchors. These have a M16 internal thread available to suit heavy duty applications.

Scaffolding Tie down

Scaffolds are temporary structures used to support a work crew and materials during the construction, maintenance and repair of buildings. Scaffolds need to meet local codes foo safety and stability, and must be able to withstand high winds.

​Our anchors are used to tie down scaffolding either through guy wires (using eyebolts) or by anchoring the base of the scaffold directly to the asphalt surface. Once the project is completed, the scaffold can be removed by opening the bolts that hold them down, and the anchors can be left installed as they are flush the surface.